Monitor multiparametri gima bm3

GENERAL
● Display: 7″ colour TFT 800×480 pixels
● Dimensions: 238 x 250 x h 163 mm
● Weight: 3.1 kg
● Trace: 4 waveforms: 2*ECG, SpO2, Respiration, Sweep speed: 6.25, 12.5, 25, 50 mm/sec
● Indicators Categorized alarms (3 priority levels)
● Visual alarm, QRS beep & SpO2 Pulse beep, Percent (%) SpO2 pitch tone, Battery status, Enternal Power LED
● Thermal printer: 25, 50 mm/sec (paper width 58 mm)
● Battery: Rechargeable Li-ion battery
● Operating time: 1.5 hours (fully charged)
● Interfaces:
– lan digital output for transferring data
– DC input connector: 18 VDC, 2.5 A max
● Operating voltage: 100-240 V, 50-60 Hz
● Data storage: 128 hours trends, 20 cases of 10 sec alarm waveform

ECG
● Lead type: 3-lead, 5-lead (option)
● Lead selection:
– 3-lead I, II, III
– 5-lead I, II, III, aVR, aVL, aVF, V (option)
● Heart rate range:
– Adult: 30 to 300 bpm,
– Neonate/Pediatric: 30 to 350 bpm
● Heart rate accuracy: ? 1bpm or ? 1%, whichever is greater
● Sweep speed: 6.25, 12.5, 25, 50 mm/sec
● Filter:
– Diagnosis: 0.05 to 150 Hz
– Monitoring: 0.5 to 40 Hz
– Moderate: 0.5 to 25 Hz
– Maximum: 5 to 25 Hz
● S-T segment detection range: -2.0 to 2.0 mV
● Arrhythmia analysis: ASYSTOLE, VTACH, VFIB
● Pacemaker detection mode: Indicator on waveform display (user selectable)
● Protection: Against electrosurgical interference and defibrillation

SpO2
● % Saturation Range: 0% to 100% ? 2 digits (70% to 100%)
● Pulse rate range: 30 to 254 bpm ? 2 bpm

NIBP
● Technique: Oscillometric
● Measurement Modes: Manual/automatic/continuous
● Pressure range: 0 to 300 mmHg ?3 mmHg
● Measurement range:
– Adult pressure: 20 to 260 mmHg
– Pediatric pressure: 20 to 230 mmHg
– Neonatal pressure: 20 to 120 mmHg

Respirations
● Method: Thoracic impedance
● Range: 5 to 120 breath/min
● Accuracy: ? 1 breath/min
● Apnea alarm: yes

Temperature Unit
● Range: 0 ° to 50 °C (32 °F to 122 °F)
● Accuracy: ? 0.1 °C (25 °C to 50 °C), ? 0.2 °C (0 °C to 24 °C)
● Compatible with: YSI Series 400 Temperature Probes